D7 contains surfactants, mild solvents, inorganic salts, a low concentration of hydrogen peroxide (~3.5%), a hydrogen peroxide activator, and water. The surfactants soften the cell walls of pathogens which allows the activated peroxide to penetrate to the interior for complete kill. This unique combination of mild ingredients works synergistically to kill persistent biological pathogens which has been demonstrated in testing at government and private facilities and in many field applications – outperforming formulations that contain much harsher chemicals.
COVID and Long Term Health Care Sanitizing
D7 can effectively inactivate coronaviruses. In tests at Kansas State University, D7 was shown to rapidly and completely inactivate a >5Log10 concentration of Bovine Coronavirus (BCV) with a one minute contact time even in the presence of a 50% organic loading (Bieker et al., Rapid Inactivation of SARS-like Coronaviruses, Sandia National Laboratories, SAND2004-1120.). Note that in the study, D7 is referred to by its development name of DF-200. Based on these results, D7 can effectively be used to disinfect facilities against SARS-CoV-2 – even with high organic or soil loads.
D7 is extensively used world-wide to combat COVID-19 with excellent results
Over 1000 tons of D7 have been used in medical facilities and other facilities in China and other countries in the last two months to successfully disinfect the SARS-CoV-2 virus. According to medical personnel in China, it is the only disinfectant that seems to work against SARS-CoV-2. It is also being successfully used for disinfection operations in virtually every other country with significant numbers of COVID-19 cases and also in countries without many cases where disinfection operations have been stepped up to prevent the spread of the virus.
The primary reason D7 is a superior disinfectant for SARS-CoV-2 as compared to many other products is that, in real world applications, SARS-CoV-2 does not exist alone. When airborne, SARS-CoV-2 is almost always surrounded by and protected by bodily fluids (e.g., saliva, nasal mucous, etc.) which makes it very persistent in the environment. When it lands on a surface, the situation is even worse because SARS-CoV-2 is also protected by organic material and soil on those surfaces making it even more persistent. In addition, the genetic material in the SARS-CoV-2 virus is surrounded by a lipid envelope (i.e., an oily material).
The detergents and mild solvents in D7 cut through the bodily fluids, soil/organic material, and lipid envelope so that the hydrogen peroxide and activated hydrogen peroxide in D7 actually reaches and destroys the virus.
Other disinfectants are repelled or inactivated by the bodily fluids, soil/organic material, and lipid envelope surrounding SARS-CoV-2 and never actually come in contact with the virus so it survives. Many of these other disinfectants pass laboratory tests against viruses in artificial conditions but fail in real-world applications. This superior action of D7 in the presence of organic materials is illustrated in Figure 1 below (note that the actual SARSCoV-2 virus is even more complex than what is shown in the figure and contains a virus protein coat [i.e., capsid] making it even more important to use a disinfectant such as D7 to penetrate this coat and reach the RNA)
Figure 1: The detergency and low surface tension in D7 allows it to penetrate organic matter and bodily fluids to reach and destroy the SARS-CoV-2 virus.
The second reason why D7 is a superior disinfectant for SARS-CoV-2 is that it has very high efficacy against a large spectrum of pathogens, including SARS-CoV-2. Efficacy in disinfectants is measured by log kill as shown in Table 1 below:
Table 1: Log kill efficacy of disinfectants
Unfortunately, many government organizations and others are promoting the use of low efficacy disinfectants in the battle against COVID-19. For example, most hand sanitizers use ethyl alcohol as their primary disinfecting ingredient. Other products may only contain a quaternary ammonium compound (i.e., quats) that also have relatively low efficacy. Using these types of disinfectants (and others with low efficacy) may present a significant problem because the large number of SARS-CoV-2 viruses deposited on a surface from the cough or a sneeze of an infected person may overwhelm these low efficacy disinfectants leaving infectious viruses behind even after disinfection operations. Recent research (Pan et al., Viral Load of SARS-CoV-2 in clinical samples, The Lancet, 20:4 [pp. 411-412], February 24, 2020) has shown that COVID-19 patients may have very high levels of SARS-CoV-2 viruses (i.e., viral load) in their upper respiratory system that could be expelled during a cough or sneeze. The sizes of a droplet expelled during a sneeze varies from <10 m to as large as 1000 m (Han et al., Characterizations of particle size distribution of the droplets exhaled by sneeze, Journal of the Royal Society, 10:88, November 6, 2013). Based on the data from these two studies, the number of SARS-CoV-2 viruses expelled during a sneeze from larger sized droplets (i.e., droplets that are likely to land on a surface) and the associated results of low efficacy vs. high efficacy disinfectants under various conditions (i.e., best case vs. worst case scenarios) are summarized in Table 2 below:
Table 2: Potential number of viruses remaining from a single sneeze droplet following alternative disinfection processes.
As can be seen, disinfection with low efficacy disinfectants (such as ethyl alcohol or quats alone) may leave infectious SARS-CoV-2 viruses on the surface which can lead to the possibility of new infections in people that come in contact with these surfaces or fomite transport (i.e., transport on shoes, clothing, equipment, etc.) to other surfaces and areas. The situation is likely worse than shown in Table 2 because, as noted above, ethyl alcohol type disinfectants may not even achieve their maximum efficacy because of the presence of bodily fluids and other organic matter. However, the situation is quite different if D7 is used because its higher efficacy can effectively destroy all the SARS-CoV-2 viruses in the sneeze droplets on the surface – even in highly infectious conditions.
The final reason why D7 is so effective against SARS-CoV-2 is that it can easily be deployed by a variety of methods to handle any situation. It can be dispersed as a highly stable foam through existing foam generating equipment. When deployed as a foam, it clings to vertical and downward facing surfaces for 30 minutes or more to achieve long contact times against persistent toxic materials including biofilms. It can also be deployed as a liquid spray either through large-scale sprayers or from a hand-held spray can (i.e., BDAS+) which enables rapid deployment within seconds. D7 can also be deployed as a fog (or mist) from aerosol-generating devices primarily for interior decontamination – which is the ideal deployment method for both large and small spaces potentially contaminated with SARS-CoV-2. Finally, D7 can also be deployed by wetting microfiber towels and wiping touch points (e.g., door knobs, hand rails, escalator rails, etc.) where SARS-CoV-2 likely resides. Once D7 comes into contact with the virus, either in the air or on surfaces, it is quickly destroyed reducing the risk of infections to people in the area and reducing the potential for fomite transport. Most importantly, when D7 is deployed using any one of these methods, it eliminates SARS-CoV-2 even when it is embedded in soil, organic material, and bodily fluids which renders other disinfectants ineffective.
In summary, D7 is likely to be a superior disinfectant for SARS-CoV-2 because of the following reasons:
For these reasons, D7 should be the primary choice for SARS-CoV-2 disinfection operations.
© 2023 · The Hood Boss